Topic: Lowrance Multi-Function with Fuel Flow

Guys,Which is the preferred model of Lowrance...the LMF400 with red connectors or blue connectors?I have seen them online with the EP-60R fuel flow meter and EP-10. I am getting a new ETEC installed and wondering if this is good option vice the I-Command gauges that are expensive.The Lowrance Runs about $159....Thanks,Dan

This topic has 2 replies, 3 voices, and was last updated 18 years, 3 months ago by 4Bassin.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
October 1, 2007 at 2:26 am #341166

Basscat Dan
Participant

Guys,Which is the preferred model of Lowrance…the LMF400 with red connectors or blue connectors?I have seen them online with the EP-60R fuel flow meter and EP-10. I am getting a new ETEC installed and wondering if this is good option vice the I-Command gauges that are expensive.The Lowrance Runs about $159….Thanks,Dan

October 1, 2007 at 3:23 am #341186

Bass Cat Boats
Keymaster

Check with Lowrance and get the private label fittings, some are black. The Red ones seem to work best and the system you are considering works well. BCB

October 1, 2007 at 7:02 pm #341202

4Bassin
Participant

As far as I know the red fittings are the new network fittings and they are the standard for this year. Lowrance used the larger blue connectors until early this year. That was one of my biggest complaints because they fielded the new connectors and did not make a adapter cable available until around June. I have a LCX111 unit on the dash and purchased a 520C and could not network them together because of the network cable changes. All said though I installed the EP-10 fuel flow sensor and it is fairly accurate. You can keep track of fuel used on trips, yearly and monitor fuel flow per hour when running. Hope this helps…
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic. Login Register