Topic: 250 SHO 2010 PUMA FTD

250 SHO 2010 PUMA FTD

GOOD AFTERNOON. HAVE 2010 PUMA FTD WITH RAPTORS. 36 VOLT LIT AND 16 VOLT LIT. 31 GROUP AGM. 10 INCH ATLAS. NEW TO 4STROKE ON THIS MODEL. DID HAVE VZ225 HPDI. I HAVE HEARD THAT THE SHO LIKES TO RUN HIGH. WITH MY TEMPEST I COULD RUN MY ATLAS AT THRE 3 MARK ON THE JACK PLATE AND ACHIVE 7O, 71. WITH THE SHO IM SEEING 72 AT 56-57 HUNDRED. I KNOW IM MISSING SOMETHING. WAS THINKING I WOULD AT LEAST SEE 75. FIXING TO TRY 24 AND 24 FURY WITH VENTS PLUGED. DOES ANYONE KNOW ABOUT THE JACK PLATE HIGHT ON A SHO WITH THIS MODEL?

This topic has 1 reply, 2 voices, and was last updated 6 months, 3 weeks ago by PhilAddison.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
June 16, 2025 at 11:43 am #728370

Rickeylee66
Participant

GOOD AFTERNOON. HAVE 2010 PUMA FTD WITH RAPTORS. 36 VOLT LIT AND 16 VOLT LIT. 31 GROUP AGM. 10 INCH ATLAS. NEW TO 4STROKE ON THIS MODEL. DID HAVE VZ225 HPDI. I HAVE HEARD THAT THE SHO LIKES TO RUN HIGH. WITH MY TEMPEST I COULD RUN MY ATLAS AT THRE 3 MARK ON THE JACK PLATE AND ACHIVE 7O, 71. WITH THE SHO IM SEEING 72 AT 56-57 HUNDRED. I KNOW IM MISSING SOMETHING. WAS THINKING I WOULD AT LEAST SEE 75. FIXING TO TRY 24 AND 24 FURY WITH VENTS PLUGED. DOES ANYONE KNOW ABOUT THE JACK PLATE HIGHT ON A SHO WITH THIS MODEL?

June 30, 2025 at 8:03 am #728444

PhilAddison
Participant

You are just going to have to play around with that set up. The jack plate is an 8″ jack plate if Bass Cat installed and not 10″. Raise jack plate until you lose top end speed. There is no magical number for all hulls based on engine, weather conditions, elevation, and personal loads in the boat. Based on your posted rpms it sounds like you are over propped.
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic. Login Register