Blue water led

[Bass Cat Boats]

The folks at Blue Water should be able to help you out sooner. The staff here that is aware on Blue Water is out of town today.

[mjacobs]

I have had the same problem with blue water leds. They havent been responding to e-mails.

[mjacobs]

I found the post that corrects the problem with the alarm system. “I have one compartment working properly using a 870 ohm 5 watt resistor across the circuit. Alarm is working, LEDs are lighting up perfectly. The resistor puts enough load on the circuit for the security system to do its thing. I will report back when I complete the job.” Link is below shows the thread and where you can order them.http://basscatowners.yuku.com/topic/773 … nts?page=2

[Blackpuma]

I clicked on link didnt take me to nothing also do u put the resistor in each compartment or whatSent from my XT1080 using Yuku app

[mjacobs]

Yes you have to put a resister in each compartment. Do a search for blue water leds in the forum. The post is from 09 and was by fishndav. There is a diagram how to wire it and also a link to the resistor you will need. I ordered them and they where 5 bucks.

[mjacobs]

My post was w here I copied it from another post.

[mjacobs]

I also made my own lid switchs to replace the ones in my 07 puma.

[patmay31]

Mike,I met you at Sunrise point this Yr. Can I have you email adress?thanks

[mjacobs]

Sorry I havent been in here for a bit. My e mail is mjacobs061669@yahoo.com. Merry Christmas

[Author]

Posts