Box lights not worki g

[Bass Cat Boats]

The output power on the A-Ten dash assembly. Those are color coded wires and they should be easily traced.

Your dealership should be able to assist you.

BCB

 

[TAKFishing]

Thanks BCB.

 

I’ve not had a chance to try to self solve but regarding the A10, you are saying the box lights’ power originates via the a10?  I ask as there are no a10 buttons as I understand covering box lights.  I have a spare a10 is trying to swap this worth while?  Trying to fix myself before 8 hours of driving to/from dealer. I assume none of the lights are getting power but if one dies do they all stop working?  Any more suggestions?  TIA.

[Bass Cat Boats]

Just plug #2 is dry and freestanding then see if that helps first.

[TAKFishing]

BCB I swapped the A10 and that did not do the trick. From what I can tell all the connections appear sound.  Any suggestions regarding grounds or ???

[Cajunhunter67]

If you have a voltmeter, I would start checking power at the box light closest to the A10. Starboard locker. I would also OHM the ground wire to battery and see if its open. Remember, if you check power at the locker and the ground is open, it will show no power. If it shows no power at the first locker light, get yourself some  wire..(.even old speaker wire will work), run a ground from the battery and than check power using that ground. If you have power, there’s and open ground. If you don’t, there’s a power issue. Check for any butt connectors that may have a wire loose (A10 under console to locker). Also is the pump in-pump out part of the switch working? Power coming to the A10?

Don

[Author]

Posts