Bench seat removal is pretty straight forward though there are some screws in the bottoms of the backrests that we get quite a few calls about. About an inch or so up from the bottom of these backs look for a small hole in the vinyl, and this is where a screw is ran down to hold them in place. If youre trashing the old seats the easiest thing to do is cut the vinyl and foam with a knife to expose the screwheads, otherwise you have to fish them out with a screwdriver. Everything else comes out real easy. Bucket seat installation is not too bad. Some 2 1/2″ screws into the front hinges and more screws into the back frame. Feel free to contact Service if you need more detail once you start the job. BCB