Topic: DIY Transducer Saver $10.

DIY Transducer Saver $10.

Here my $10.00 Tranducer Saver made from a 2" Copper Coupler $5.08 and Expoxy $4.89. ps a touch of Elbow Grease N/C.. Cut the two slots with a hacksaw, or dremel tool, grind a radius so the coupler fits the motor (not to much because you dont have much room with the coupler due to height of transducer also keep the slots for the clamp high to clear the transducer) once everything fits take the coupler an set on a piece of Duct Tape place the Transducer into the coupler and press down on to the duct tape mix the expoxy and pour in.. Let cure and remove the Duct Tape. Bullet Proof.

This topic has 3 replies, 3 voices, and was last updated 9 years, 9 months ago by topwater.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
July 6, 2015 at 6:55 pm #287476

Bass Cat Boats
Keymaster

They have made these of plastic, PVC and other things for decades. One gentleman we knew with a plastic injection company made a mold so he could take the deductions on his fishing with his development of marketing. Bassmaster had a do it your self post in the back pages using PVC about 30 to 35 years ago. BCB

July 6, 2015 at 7:01 pm #287477

Redngoo
Participant

Cool!!2013 PANTERA 2MERCURY 200 PRO XSMINNKOTA 80LB FORTREX25 fury

July 6, 2015 at 7:29 pm #287478

topwater
Participant

Lol should of known someone had thought of this already.. I also thought about PVC but opted for the metal .
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic. Login Register