Owner's Board

Hamby’s Question

My Hamby’s bumper seems to come loose on back tip end. It’s only about an inch but want to get it under control quickly. What adhesive is used and what is the process. I’ve never worked on one of these before. Thanks in advance.

This topic has 3 replies, 4 voices, and was last updated 5 years ago by Bass Cat Boats.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
April 1, 2020 at 8:47 pm #688554

Cajunhunter67
Participant

Hopefully BCB will chime in, but I believe this will work.

https://www.basscatstore.com/uroflex.aspx

Don

April 2, 2020 at 7:56 am #688557

catdude28
Participant

Six 10 epoxy is the product recommended by Hambys.

https://www.westsystem.com/specialty-epoxies/six10-thickened-epoxy-adhesive/

April 2, 2020 at 11:11 am #688589

Bass Cat Boats
Keymaster

Yes, it was, though we use euroflex with success.

Your choice…. we toss the epoxy from our experience on the install.

BCB
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic. Login Register