Lights

[Bass Cat Boats]

Those are automotive light kits like Cepeks. Have bright ones as floods dont work well for docking and these are not legal for operation underway.

[Bass Cat Boats]

Yes…you will have to drill some holes through the boat to get the wires inside but yes you can retrofit them. Judd Lasiter

[Bass Cat Boats]

Yes, they are mountable with little trouble as basschaser pointed out. Three per side standard, and more if you want. BCB

[basscatbat]

Thanks

[Bass Cat Boats]

The lights are corroded in the bronze switch contact. You can clean the contact or replace the lights. We clean the contact and put petroleum jelly on it.

[SuicideNemesis]

Thanks- Chaz

[tae73]

How do you remove them?

[btgibson]

BCB is right on! Same thing happened to me…I cleaned the bronze contact with a small screw driver and all is well now

[Bass Cat Boats]

TAE 73, look behind the light in the console to see how it is made. You can gently pry out the lens cover and pull the bulb, or to make it easier to get to the contacts, you can remove the whole unit and unplug the wires.

[Bass Cat Boats]

There are two tension clips that hold the two part light and housing in place. If you can see behind the console light you will figure it out easily.

[Author]

Posts