This should get you all the information you need on your NexSysLink manual. This is a very open system and handles both NMEA 2000 protocol and the SmartCraft systems. The difference is in the Tachometer for each system, while the other gauges are identical. The small touch pad on your dash with the Mode and Up or Down arrows will move through the scrolling display. You can hook up fuel flow also on Yamaha if you have the sender from Yamaha that converts their older software of NMEA 0183 over to the NMEA 2000 software.
Two of the neatest features on a NexSysLink gauge are the triple line LCD window which lets you program up to 10 functions, of which 9 are programmable above hours, in the order you desire to see them. Then you can view three functions at one time. For example you can view Tach, Fuel, Water Pressure or other functions all in that one window without scrolling.
The other neat feature is the Recall button which gives you the Maximum RPM and Speed you have run since the last Zero.
.
