Topic: Pantera II with 200 SHO

This topic has 7 replies, 4 voices, and was last updated 14 years, 9 months ago by sdfd504.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
August 13, 2010 at 1:51 pm #408339

kramr
Participant

On the trailer or in the water?

August 13, 2010 at 1:55 pm #408342

sjbcat
Participant

pII is stated at 19ft. 1 inch, with 8 inch manual jackplate and 200 sho add appox. 40 inches. this would make it 22ft and 5 inch appox.

August 13, 2010 at 2:07 pm #408345

sjbcat
Participant

the 40 inch is measured with the motor in the vertical position. not extended on transom saver. sorry for not making this clear on first post

August 13, 2010 at 4:22 pm #408348

sdfd504
Participant

Looking at anywhere from around 22-23 I would bet. My PII with a Opti is right at 22 but the SHO is a bigger motor it looks like atleast.

August 14, 2010 at 1:26 am #408353

kramr
Participant

Have the PIV with the SHO. Park it in a 23 ft garage with the motor most of the way down. There is 5 inches front and rear, plus subtract 4 inches for the boat length.

August 14, 2010 at 2:11 am #408355

steveM
Participant

Da&%My Garage is 22 i guess I could angel it a little, but my two Harleys are there. Maybe a hols into my daughters room.ThanksGunz

August 14, 2010 at 2:50 am #408358

sdfd504
Participant

Get a standard jackplate which is 6″, and you should be very very close. I am not sure how much longer the SHO motor is compared to the Opti but my garage is 22 and I have a few inches to spare in the front with the motor against the wall. I would try to find a dealer that has the same combo you are wanting and see if they can measure it for you to double check.
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic. Login Register