Phil Or Judd

[PhilAddison]

I never heard of the prop until the other night when someone mentioned it here. After doing some looking I found some info on the prop and it appears that a 26p will be the largest pitch up to this point. With a 250 Mercury, Im betting this prop is too small, especially since it is a 3 bladed prop. A 27p Trophy is what I would turn in most applications.

[NELA COUGAR]

Thanks Phil Glynn

[basschaser]

I havent seen one but knew there was one in the works. I dont remember how but I heard it somewhere? I wouldnt mind trying a 26 Trophy at some point down the road if I have the opportunity. At this point though I agree with Phil though, the 27 Trophy seems to be the prop for these new hulls. Judd Lasiter

[Bass Cat Boats]

One thought does come to mind since this prop is constructed from a different alloy than stainless as it might be a little more rigid and may not flatten as much as those constructed of stainless steel. This may lend to less prop slip and thus give a little extra at WOT. Rick Pierce will be the first to test and if there are improvements then he will likely publish this info in some manner. In addition, I suspect this prop to be a little more expensive than the stainless steel Tempest or Trophy.

[Bass Cat Boats]

There still are no produced 26″ versions, and production of those will most likely he at the start of 09 model year. They intend on a 27″ also, though it is not being worked on yet.

[Author]

Posts