Power pole install pictures

[NCStatefan]

I have seen them mounted to the seat pedestal utilizing a custom bracket. That would be a good option.

[Tony Steinfeld]

I currently have a single power pole mounted on the pedestal in the battery compartment, but need to figure out a way to mount 2 pumps in there and theres not enough room to mount them on top of each other. Last edited by Tony Steinfeld on October 22nd, 2012, 11:02 pm, edited 1 time in total.If you cant convince them, confuse them.

[JSLAW]

Clean that bilge out!

[Joey]

What I did when I went to 2 pumps, is put one back where it was and I mounted the other on my seat post between the livewells. I used a 1 1/2″ muffler clamp from a local parts store on the bracket. It has worked out awesome! Still have plenty of room to get to the oil and can remove a battery with ease if needed.

[Tony Steinfeld]

Thanks Joey. I might have a way I can mount the second pump on 2 of the threaded rods that hold down the battery tray. I have some .100 sheet aluminum i can bend almost like a C channel and mount it to the 2 rods top and bottom and secure it down with the tray nuts and have the pump bolted directly to that and one to the pedestal pole. Ill take some pictures when all is done and put them up for others to see.If you cant convince them, confuse them.

[Author]

Posts