Ram mount question

[Bass Cat Boats]

Most are mounted to the side panel just inside the deck there.

[kent7351]

Jamey, I have my 898 rail mounted and I have never had an issue. Im sure the 1197 is much heavier but it may still work if you support the “arm” with a rubber block like this person did on their P4.

[ppantera]

I think you are looking for RAM-111U & RAM-233U.I hope this helps.

[nivek]

This ram mount is exactly what I have been looking for does any one know who makes it or where I can purchase it. Thanks for any help you can give me

[Caldwellj]

Try this link or your local BCB dealer. http://www.ram-mount.com/…s/tabid/141/Default.aspxThanks for the help guys, think Im going to go with what BCB said. Will post some pics once I get it mounted.

[ischnell]

I have mine on a ram mount but It is angled almost to the deck about 25 degrees off the deck and the face is pointed at me in the seat. The mount is about8″ long and no it doesnt get in the way of a cast. It does now and then get the electric motor cable across the face if so I just kick them over a little.Irv

[socalpIII]

ischnell wrote:I have mine on a ram mount but It is angled almost to the deck about 25 degrees off the deck and the face is pointed at me in the seat. The mount is about8″ long and no it doesnt get in the way of a cast. It does now and then get the electric motor cable across the face if so I just kick them over a little.Irv+1mine is angled slightly as well.

[Bass Cat Boats]

I have Hummingbird 800 series on bow, and my boat came from BassCat with front Ram mount which I ordered. I actually replaced part of the mount and purchased the shortest length available which is perfect.

[Bass Cat Boats]

The BCB RAM mount is that length so that in rough water you can fold the unit face down on the deck for protection.

[Bass Cat Boats]

Any more info on the BCB ram mount? I have read a few post that have mentioned that its in the works. I have not found it in the store yet.Jon

[Bass Cat Boats]

The first stems were to be in last month and apparently they were not in yet.

[champion jon]

Thanks BCB. I will keep an eye out for it. Any word on what this mount will do that the regular ram mounts dont?

[Caldwellj]

I have run a RAM mount at the bow for a few years now.My units stand as tall as I can get them so they are closer to me and I can see them better. Even though Im only 57″ I have never had any issues hitting them or them being in the way.Do it…you will be happy you did.Jamey

[Rick V]

Answered

[Author]

Posts