Trailer Roller Mod (as mentioned in a previous post)

This mod was spawned from me getting my trailer a little to deep on my previous Cat and chipping up the gel on the front end. I tried to do it with a dremel and it made a big mess because the roller is to soft. What worked best was a utility knife with a fresh blade. Obviously these 2 outside rollers will not turn after I did this but it won't go in between the inner and outer roller. Good luck...sorry for the dark pictures, little dark in the garage at nite Judd Lasiter

This topic has 7 replies, 4 voices, and was last updated 18 years, 11 months ago by Bass Cat Boats.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
June 1, 2006 at 4:37 am #436654

Bass Cat Boats
Keymaster

Nice Job Judd!

We would like to be able to purchase these already molded like this, though have not been able to accomplish that yet, and the job others have tried to sell us is pretty low QC©

BCB

June 1, 2006 at 10:12 am #436655

Rick from Lafayette
Participant

Judd,
Excellent idea! I also had the same problem. I’m calling Scotty today to order a set. I have my utility knife ready with some fresh, sharp blades.

June 1, 2006 at 12:43 pm #436656

Turbo2000
Participant

Thanks for the pics of that mod .. I ordered a new roller yesterday and some gel coat to fix the scratch/gouge on my bow … I still would like to have a SST piece molded to fit the bow where the roller rides … kinda like the way the hambys works … Ill be a roller cutting fool this weekend ..

June 1, 2006 at 2:47 pm #436657

basschaser
Participant

No problem guys. It took me longer than it should’ve because I am so anal about the boat stuff. Didn’t want gaps and crooked rollers LOL!

As you can see in the pictures, that little mold mark on the outside of the roller is about the correct depth to cut.

Turbo…I seem to remember Hamby’s or Keelshield once made a bumper that would go all the way over the bow eye.

Thanks.

Judd

June 1, 2006 at 4:30 pm #436658

Rick from Lafayette
Participant

Turbo,

I had that SS protective piece on a previous boat and it chewed up the roller pretty bad. I think that if you mount the softer black roller you won’t have the chipping issues. I ordered my black roller today.

June 1, 2006 at 4:35 pm #436659

Bass Cat Boats
Keymaster

I figured theyed like that idea Judd.cg

June 1, 2006 at 5:12 pm #436660

Bass Cat Boats
Keymaster

Actually we have had a few others do this with other methods and by hand cutting them out, using everything form a sabre saw and hand saw to a blade.

BCB
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic. Login Register