Trailer Tail Light

[Bass Cat Boats]

Just push in on it. some times you have to push on one side but it should pop right out of the rubber grommet. Then just pop the new one in. I invested in the LED lights. You can find them in allot of places now. I got mine at Gander Mt. the same plug plugged right into the new lights.

[Bass Cat Boats]

Just make sure the grommet lip catches the back side of the fender.

[SCOTAKNS]

You have to buy the whole light. They are only about $10 from almost any parts store.

[Basscat36]

Thanks, I will check the parts store, if they dont have it i will order it from BassCat.

[fishmagnet]

If you plan on keeping the boat for a few years, do yourself a favor and replace both tail lights with LEDs.Theyll likely be the last tail lights you ever need to replace, brighter and safer too.BCB has em and so does http://www.easternmarine.comClick on trailerparts superstore at the bottom of the homepage, optronics, and look for #STL-72RBYou can buy just the LED fixture from eastern, no need to buy another rubber grommet or pig-tail connector, as the ones you have will interchange.Truklight or Optronics are reputable brands!Been there, done that!Last edited by fishmagnet on March 14th, 2010, 1:14 am, edited 1 time in total.

[billius]

Sometimes…if you cant find one at an auto parts store, like AutoZone, etc, you could try a boat dealer or even an RV store.

[Author]

Posts