[Bassm1n.basscatowners]

Thanks. More room than i remember. Had so much going on did not think of pulling some rods out.. thanks

[Bassm1n.basscatowners]

Yes it is mojos. Thanks for info. Had not thought about a 27 but that might add a little stability too. Need a spare prop anyway and that is why i was thinking 4 blade. Let me know if you do addl testing and come up with something. Maybe the fa tory has expermented.

[Bassm1n.basscatowners]

I will try all of this. So do I want saltwater and not freshwater mojo? I did have on auto so will try setting next time. Tried surface clutter but then had to add sensitivity and line came back. Would be nice to have an old flasher for running shallow water.

[Bassm1n.basscatowners]

As usual. Great info. Thanks for all the help.

[Bassm1n.basscatowners]

Yes 8 holes total. I am surprised that adding 4 holes and putting 4 small plugs resulted in blow out. The holes sre so small I figured that would have been perfect. Sounds like I need to start with all 4 plugged and drill small hole in 2 and go ftom there.

[Bassm1n.basscatowners]

Did the extra holes help with loading on trailer?

[Bassm1n.basscatowners]

Figured it out. Take it to dealer and let him di it

[Bassm1n.basscatowners]

Thanks. I have 2012 claw wheels

[Bassm1n.basscatowners]

Ordered one from R&R who makes the slidemaster for BC. Got it but the holes did not line up. Called and was told the BC slidemaster is different and needed another splash plate. Now I need to send back so they can send the correct one. If there are options you would think a simple question at ordering of what boat is your jackplate on would resolve the hassle for all. Oh well!

[Bassm1n.basscatowners]

thanks

[Bassm1n.basscatowners]

This going to show how dumb I am on this stuff but if you dont ask you never learn. How is sonar different than DI??

[Bassm1n.basscatowners]

2012 Eyra. Console added by factory after delivery. Rock solid no squeaks.

[Bassm1n.basscatowners]

do you also clean JDM reels from Daiwa, Shimano and Megabass?

[Bassm1n.basscatowners]

The tips will lay on the deck if the rods are placed all the way forward but e they are in the way fishing. If tie down on lid the tips rest on consoles / gunnel but more romm to fish without moving rods back and forth plus can access the boxes easier. I think i prefer the second scenario.

[Bassm1n.basscatowners]

Ok. Just saw spec page that lists aluminum lids. I assume this is the issue. So should I just drill and bolt?

[Author]

Posts