Owner's Board

DJones54

Forum Replies Created

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • #413582

    DJones54
    Participant

    I think at the ideal is a good one. But we will losses the ability to have are boats look at by the people that build them at the factory. I understand the repair Van does a lot of work but this would double it. Moving the tournament around the USA will cause problem. I like the tournament so much that I will go to it no matter where it is. I would also like to give a big Thanks for having the best tournament every year for the number of boats.

    #365230

    DJones54
    Participant

    No it was not a Pinpoint just a Tournament style.

    #417201

    DJones54
    Participant

    If you have ever operate your boat in cold weather and the line froze that comes from the lower unit to the gauge. This will cause the gauge gear to be push back this will cause the needle not show the correct water pressure. I would say replace the gauge. In a cold area the only thing you can do to stop this is when you come out of the water after fishing, is lower your motor and let the water drain out but if the little hole on the lower unit is stop up then it will not drain and on your dive home the system will freeze up and cause the same problem again.

    #414995

    DJones54
    Participant

    I have a 2002 Jag and I have the same problem. I have gotten water out of the seat for up to four days after a rain. That a lot of water for just small area. My boat is cover here at home. The only way the water get in is when it is under cover on the lake to and from.

    #415000

    DJones54
    Participant

    I have been think able that to. My only problem is the holes and the thin coveing that BCB talk about on web site about seats.

    #407405

    DJones54
    Participant

    If you go out on the Internet you can found the manual for the A60 system. I call the local NAPA parts house and the NAPA parts number is 7552094 it is part of a kit they have. Send me your email and I will send you the manual that I found.

    #395470

    DJones54
    Participant

    Here are two Marine salvage yard that are great guys. One in Grove Oklahoma, Fankies Marine Repair & Service Phone 918-786-8180 and the other is in Camdenton Missouri, FnA Marine 573-480-5644. Both will ship you the item if they have. Hope they can help.

    #352335

    DJones54
    Participant

    I had the same problem on my 2002 Jag when I got and the dealer shad to connet a wire under the dash.

    #349736

    DJones54
    Participant

    I can just say congratulation to all. I have been working with Martys Marine for years and they are a outstanding bunch of guys/girls and will work to get you in the right boat (i.e now it is a BassCat.)

    #349763

    DJones54
    Participant

    Martys is just outside of Osage Beach, about 2-3 miles west of HWY KK on 54 going towards Camdenton , they are just after it opens back up to 4 lane on the west side of the road. Address is 6755 Highway 54, Osage Beach or the old road name is Springville RD. NOT by the bridge that is the old dealer Dave M. that no long cover BASSCAT.

    #327000

    DJones54
    Participant

    I when down to Aurora about a year ago and talk to the Owner about my cover leaking. He suggest I use 303 product. I order some and it works. It is a spray that is used on outdoor covers.

    #374194

    DJones54
    Participant

    I was watching a Bass show the other day and saw one of the Pro fishman in the water trying to get his power pole out of the mud. I think that one that go stright up and down would be better because you could go to the front of the boat and jump up and down to get it loose and not have get into the water.

Viewing 12 posts - 1 through 12 (of 12 total)

Skip to toolbar