[TAKFishing]

A look….

[TAKFishing]

Does anyone have pics of a BCB with an aftermarket small bolt decal? Love the look on Eyras/Pumas and am entertaining one for my 12 PII…

[TAKFishing]

Im about to do the install on my Opti. Read somewhere it is easier to remove the cowl for the installation, so I will be doing this indoors in a 70+ degree environment. Any additional tips for installation? Also, what type of solvent can I safely use to remove the leftover adhesive remaining after I remove the existing pebble grain band?Thanks

[TAKFishing]

Collinite 925 on the hull, lemon pledge on the seats, wet chamois for wipe down after each trip…

[TAKFishing]

Bass Cat Boats wrote: Yes it is, a $39 part is the culprit.

Service will fix you up! You should file an angle to the slot the ribbon tape goes through to remove strain onthe corner bend, which is the issue.

Thanks BCB.   Seems like there are several flavors of this issue guys are experiencing…everything for me works fine in terms of scrolling, displays, etc.  I just have the periodic issue of losing everything in terms of the gauges.

For me if I understand what you are saying, the ribbon tape with the wires from the control pad are being pinched a bit from the original install?  Is the small control pad and ribbon wire all one piece and is this the new part to what you are referring?

Either way I’ll give parts a call and go from there.  Hopefully the install is simple and something I can do without screwing anything up.  Thanks!

[TAKFishing]

HSVBCB wrote: BCB thanks again for great service and this forum for quick answers.  I had a problem with my NexSysLink display continuously scrolling intermittently.  You offered that it was the touch pad (small one next to A10) and quickly sent one under warranty for free!  Quick simple peel and stick install and works like new.  Saved me a trip to the dealer for a simple user fix!  Thanks again for great service and special thanks for Pete who always comes through!

x2 for Pete/BCB.  Received my replacement pad last week.  Thanks again!!!

[TAKFishing]

I believe most guys go with large….

[TAKFishing]

Thanks guys…I like the idea of installing on the rod box lid and being able to open the box without having to unstrap. My only concern with that would be the potential for water leakage to the rod box via the strap screws…has this been a problem?

[TAKFishing]

Chicagobass wrote: Madcliff,Im from IL. but have a place on Lake WI. Myself and serveral other Bass Cat owners frequently fish Delavan and Geneva.Chicago – north burbs here…

[TAKFishing]

Believe you can order the entire pole/step add on for somewhere under $300…maybe $265-ish… And possible a bit less if all you need is pole and winch step. Call parts and give em your HIN, so they can match pole paint to your trailer. If you are doing the install yourself, be sure you have some serious drill bits. Here is mine…

[TAKFishing]

Not a tall step to winch…I dont believe BCB offers this with a third step…(?)

[TAKFishing]

Fly – I just returned from a week at KY lake fishing out of Cozy Cove. Had a great experience there, fine clean well kept up resort and grounds. If I can convince the family to join me for a long weekend so I can fish Kabcot, that is where I will try to stay. Call and ask for Stef or shoot them an email.

[TAKFishing]

Good gawd. Just sick. Absolutely sick. Congrats. Always liked the red and black cats…

[TAKFishing]

Nice rig, congrats. Agreed, I think my 2 little boys love our PII as much as I do…

[TAKFishing]

BIGCATTER wrote:Look on the side of the tire , and follow the tire manufacturers recommendation as far as pressure , and run them at maximum .The Deans Stinger is 44 psi rated as well. So when you say run them at max, fill them and measure to 44psi when cold? I assume the pressure goes up when trailering, exceeding 44psi so is this really ok?

[Author]

Posts