[basscatpuma3]

I can understand the worn and jiggle part but the unit is only 10 months old.

[basscatpuma3]

Thanks guys I will try the tape first, hope it works.

[basscatpuma3]

I have a 2011 Puma FTD with the small windshield and noticed the same thing, I went to Wal-Mart and found some 1/2 diameter stick on. Its used for bottom of chairs so it want scratch the floors. they have different colors and very easy to put on. just loosen your windshield, pull off the back paper and it just sticks on. You can hardly notice it.

[basscatpuma3]

I had one break also but it was because I screwed it to tight, be careful when you tighten the screw just snug it down and you should be ok.

[basscatpuma3]

Dont beat yourself up about it you and I are probably not the only ones who did it.

[basscatpuma3]

Thanks greenhornet12 yes only 3 batteries. I had a 99 PIII for 12 years with on 3 batteries and it worked out pretty good so I figured a would try it in my 2011 Puma.

[basscatpuma3]

Thanks Irv thats come useful information. I will look into the Delcos

[basscatpuma3]

will the noco charger work

[basscatpuma3]

I put the 3 layers of electrical tape, no more noise thanks BCB for the info.

[basscatpuma3]

I have the same problem with my puma ftd. I just thought it wasnt hooked up since it came thru the depthfinder. Where is this NMEA on the GPS unit?

[basscatpuma3]

does anyone have a picture of the bolt on type, I may want one myself. Like to see a picture first. thanks

[basscatpuma3]

How do you like it and what kind of charger are you using, will the new Noco charger work ok?

[basscatpuma3]

yes I saw the spacer before, I heard it is heavy. thanks

[basscatpuma3]

Thanks guys, I will try the jack up and test.

[basscatpuma3]

OK thanks for the input guys, looks like I may buy one.

[Author]

Posts