Owner's Board

shutchens257

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #438149

    shutchens257
    Participant

    Bass Cat Boats wrote:Check breaker at the battery and wires through the terminal block on the transom, then pull the master panel to see if a wire has come off a switch. About 2006 the vendor had supplemented terminal spades that were not ITC Molex brand and they don’t hold as well. Breaker is brand new, I replaced that so that bilge and horn would work. Is the easiest way just to drill out the 4 small rivets holding in the master power switch? Thank you for your response!Sent from my SAMSUNG-SM-N920A using Tapatalk

    #403484

    shutchens257
    Participant

    JEH in La wrote:shutchens257 wrote:06 Pantera Classic – Aerator & Recirc pumps work fine but livewell in/out pumps do not. Im guessing they are different pumps, which are easy enough to replace however, due to how my oil tank is mounted I was hoping someone could point me in the right direction before I pull it all out. Any help is greatly appreciated!I have read the BCB posting about the livewell system and could not find an answer to my query therein. Let me know if Im missing something!Thanks!Shutchens, is your classsic a “Vision Model” or do you have “Pro-Air” system in your boat? There may be a resettable fuse for these pumps. It looks like a little red pushbutton but we need to know what you have.Here are some links that offer more information that can help you understand what you have and could lead to your problem.viewtopic.php?f=67&t=25477&p=179848&hil … ad#p179848viewtopic.php?f=67&t=25476&p=25123&hili … pad#p25123 viewtopic.php?f=67&t=13198&p=12845&hili … pad#p12845I do have the pro air resettables. I have tried to re set them to no avail.Sent from my SAMSUNG-SM-N920A using Tapatalk

    #403493

    shutchens257
    Participant

    JEH in La wrote:This fancy CAD drawing will show you where your pump locations are. In your case pump in is nearest the transom, and pump out is the bottom pump in the rear of your livewell.IMG_1874.JPGIve just completed a lot of electrical work on it so I was just trying to figure out if the pump in and out are different from the bilge and recirc so I would know where to start. Thanks!Sent from my SAMSUNG-SM-N920A using Tapatalk

Viewing 3 posts - 1 through 3 (of 3 total)

Skip to toolbar