Seat replacement

[Bass Cat Boats]

On a 2000 model you will find very small punctures or slits under the front edge hidden by the seat bottom. There should be 3 lower screws in each seat back and two in the center back. Those are difficult to find and you can open the slits if your not saving the backs. The other will be the rivets, which are steel core Avdels.

[Jstew]

Tilt the bases forward so you can access the screws that hold them down. Should be 3 screws – 2 on the base, and one on the lower back below the lumbar pad.

[Bass Cat Boats]

There are a few mounting options and the seat centers are oui locked in place. Just pull on the center and they should pop out.

[cpcat]

I just removed my 06 puma seats. Look under the front of seats you will see 2 screws horizontal take those out and you will be able to remove the bottoms. Then theres 2 vertical screws holding the frames down and 1 screw just under the center of the back rest. Thats it. Hope this helps. Chris

[BMac4848]

While waiting for my new seats to arrive for my 2000 Pantera, I decided to take a quick look at how to replace them. Are they all riveted in? and if so how many roughly will I need. Thanks for any help, Brandon.

[jignpig]

http://basscatowners.yuku.com/topic/277 … Pantera-IVIve never done it myself but in case no one sent a PM, this may help some. I typed ” replacing seats” in the search engine and got 10 returns. Again hope this will help.96 Eyra/12 Mercury 175 Pro XS with 2015 single axle trailer2017 Victory Gunner

[BIGCATTER]

Sent you a text . — Get me some pics. — oops!! — The number I have for you is a landline . — If you read this , send me pics to 870-736-0036 / or to [email protected] — Shouldnt be all that difficult to figure this thing out . — Mark Last edited by BIGCATTER on July 11th, 2017, 9:24 pm, edited 1 time in total.

[Author]

Posts