Fury 25 prop, used twice

[downislandliving]

Had a Fury 25 on my boat for two runs, doesnt work well for my rig. Perfect condition. $oldLast edited by downislandliving on July 10th, 2014, 5:22 pm, edited 2 times in total.

[Phil Bangert]

what model and motor do you have which the 25 Fury isnt the best on?

[downislandliving]

i have a 200 Pro XS on my 11 PII. I know lots of guys are running well with it, so my guess is it is my jackplate height. I normally use a Croxtron Razor, but had it out for repairs so thought I would try at Fury. It wasnt as fast as my Razor, but it did have a better hole shot. I am sure i could have gotten more out of it if i messed with my jackplate height.

[Monsterfishin]

I have an older Fury on my 2008 PII but was wandering what kind of performance are you getting out of your Croxtron Razor? With my Fury Im only getting 5300RPM and doing only 68MPH. That is with the 2 8 Talons I put on. Wasnt sure if i should try a new Fury or try a different prop.

[downislandliving]

Monsterfishin wrote:I have an older Fury on my 2008 PII but was wandering what kind of performance are you getting out of your Croxtron Razor? With my Fury Im only getting 5300RPM and doing only 68MPH. That is with the 2 8 Talons I put on. Wasnt sure if i should try a new Fury or try a different prop.My numbers were about the same as yours, I was pulling about 5400 rpm with the Fury. You may want to try adjusting your jack plate. I think that was the issue on my PII. I think if i would have adjusted my jackplate it would have been fine. I think i needed to raise it a touch. I am getting 70-71 and about 5600 out of my Razor with 2 Talons also. I truely think the difference is the jackplate height though. My holeshot with the Fury was really, really quick. So, i think it was a touch low.

[Anonymous]

How high is your jackplate? Im running a 25 tempest plus. Had it B&Bd by mark and Im turning about 5400 and 68mph with two power poles. I recently raised my plate alittle, seems like my hole shot got worse?

[downislandliving]

Ajjean073, i will have to check. not sure the exact height.

[downislandliving]

price reduced to $380Last edited by downislandliving on July 8th, 2014, 12:55 pm, edited 1 time in total.

[Author]

Posts