Suggestions

[Bass Cat Boats]

Bass N Bucks,First of all welcome to the site and the Bass Cat family, you have made the right choice!I also have a 2008 Puma and went through the same thing with the lights. The likely just need to be adjusted. WARD made a very informative post (with pics) that will steer you the right way. http://basscatowners.yuku.com/reply/117 … ply-117260 As far as your lighted handrails you may have a problem with your touch pad or possibly a ground issue. Others should be along soon that may have had the same problem, or can steer you in the proper direction.Mike

[Bass Cat Boats]

Your rail lights may be connected to your fish insignia on the smaller touch pad.

[Bass Cat Boats]

Thanks for the replies. BCB the rail lights are hooked to the ACC button on the A10 because in the prior days to me working on the courtesy lights the rail lights were working fine. Even tried removing the rails using soap and water with no luck. They wouldnt budge.

[Bass Cat Boats]

These have set screws in the stanchion and the nylon bushing tensions them to the stainless stanchion. Loosen the screws and they will come out. They are front and rear halves and you pull one end at a time pushing them into the deck to slip out of the stanchion.

[Bass Cat Boats]

All four set screws were removed from the stanchions (two each side). Sprayed soapy water and even tried a lubricant that I knew wouldnt hurt the acrylic and still no luck. I dont want to damage the rails and dont think my problem is on that end so I left them alone.,

[Bass Cat Boats]

Trace the output where the wires are connected and start chasing your way to the rails.

[Bass n bucks]

Thanks again for the info. That was going to be my next step. Must say Im very impressed. I guarantee there is no other manufacture that would respond on a Sunday afternoon. Thanks for the help. Ill post my findings when complete to possibly help someone else in the future.,

[Author]

Posts