[ChrisB250]

DWA.. The batts will go dead with the lids open, and courtesy lights on.

If you need to leave the lids open prop them with a plano tray, or whatever, to leave them open an inch or two. In that case the mercury switched won’t activate the lights.

Q to Basscat: Why do the mercury switches in 06 activate the lights without master power?

Good luck Sunday DWA

[ChrisB250]

If you are still looking for the boat per your specs, I may have an option for you. 08 Cougar FTD, Merc 250Pro XS, Minn Kota Max 101 US2, Bobs with dual trim, and gauge, single console, 997 in dash, X38 on bow (both with GPS great vertical fish set up), 4 bank charger, loaded boat, great shape. Blue, white, black boot, best colors Ive ever had! I can get you more details if you like, let me know your wishes. Best regards Chris

[ChrisB250]

colors:Cap: Starlight blueHull, Starlight bluePins: SilverCap insert: Blue foxHull Insert: SilverReverse color console to blue foxBoot: Blackgauge bezels: Silver / chromelighted rails: blue lightdecals: silverseat: marbleseat insert: navyseat trim: charcoalBlue Grey carpetThats what was sent on the order almost 1 year ago today Last edited by ChrisB250 on May 4th, 2012, 11:47 am, edited 1 time in total.

[ChrisB250]

Set your bottom depth range manually. If you are seeing bottom and graphing then call humminbird and explain the issue and they should help you.I think it is a common problem with these units. It doesnt, in the cases Ive had, stop function. It does require more operator input intil it is resolved.Chris

[ChrisB250]

Most I have seen aee ram mount to the side of the console. I think the new dash holds the 12. you can fill the hole with a high density material, and add a ram mount in the dash.good luck with the rig!Chris

[ChrisB250]

I have always put simple green liberally over the carpet, more so in the high soil areas, let set for 10-15 minutes, and then pressure washed with a wide distribution nozzle. After the soap is out, and the carpet soaked I vacuum with a shop vac in the opposite grain of the carpet. Fluffs it up, and works great!

[ChrisB250]

I bought 3 new batteries today. Did i need to do that? Could the batteries re charge after being so badly drawn down? The first 8 came from the same vendor. I suspect the batteries were good, and i have some kind of wierd charging issue. Problem is the only way to find out is to spend another non-recoverable 400 dollars to vet the problem. Does NOCO reimburse for batteries if their charger kills them prematurely? I sure hope so…Ive got over 1400 in batteries since 1st of June this year..

[ChrisB250]

26 Fury stock, no plugs. Like Mike said 78-79. If anything a little more bite when the bow drops would be the only improvement I would like to see. My 2013 has the Gen 2 gearcase. I run a atlas hydraulic plate, and put the motor all the way down to get on plane, if not then youll blow the prop when the bow drops.

[ChrisB250]

I am trying to get a warranty situation with the brake actuator supplier cared for, and they are asking for the axle (each ones) GAWR. I can see the rating overall for the trailer at 5K, but they want to know each axles stated rating. Is that stamped on the axle somewhere, or is it something you can provide me?Thanks in advance!

[ChrisB250]

Thank you both for the help!

[ChrisB250]

[url=mailto:cbolduc2@rcn.com]cbolduc2@rcn.com[/url]

[ChrisB250]

I ran a 26 fury on a 2011 puma. Great holeshot, 76-80 depending on load. Dont plug the vents. I am running a v20 now with sho. 25 fury no vents and it planes in 3 seconds. When you throttle the sho for holeshot it has to rev to about 3500 rpm to get into the torque curve. I think the vents are key.

[ChrisB250]

Youll get those numbers in a heart beat. My 2011 Puma FTD with 250SHO loaded 77-79 MPH boat all day!

[ChrisB250]

I had a broken pick up tube one year. Had a crack near the bottom. Would pull fuel until the crack was at the fuel level line. Pretty easy fix.

[Author]

Posts