Lets see if this works, it look like it very well may
EXCELLENT!!!!!!!!! Thanks you for taking care of this issue, for those that dont know none of my stuff was transefrred to the new site and BCB worked for 4 days trying to get this right, and they finally got it figured out. THANKS AGAIN!! Jason Law
Yeah I have been working on that issue for a few hours, i have loaded avatar after avatar and none would show up, finally i got one of the ones i took while in Kodiak to get accepted and it is there if you click on where the picture should be, it just does not show up when i post. Maybe it takes 24 hurs or something.
Hey there it is
Rich your back will thank you, I would contact shap and see eaxctly how he did it. Those look sharp!!!
Charlie you should have no problem with 110 inches and a straight shot. The P4 is 98 1/2″ from outside to out side fender wheels
http://www.abaproam.com Click on the 2008 events and find the area closest to you that you would like to fish. Most events will be held on Saturday, although i think some areas will still have them on Sunday, not sure though.
That was an interesting read Rich, one has to wonder if alot of these tour pros are fishing these to ensure their qualification into the elite series next year, especially the FLW guys, who may be jumping ship in order to better promote sponsors. I think it is good for these guys to be in these event as it will give the average guy/gal a chance to see if they have what it takes to beat these touring professionals, and see if they can make the jump to the tour if they qualify. I am believer that competiton between anglers brings out the best in all of us. It is also good to see a full field and that BASS has adjusted the payouts accordingly. Good luck to all the BCB guys, and yes Scott i did notice that was your cougar going down the highway, good luck down there, the salt springs on Lake George are going to be a very crowded place especially with this colder weather moving through.
Also do not ask on te board how to set the Alarm system, this is private info and will not be posted on the board, call your dealer or BCB directly for that ifo….if you do have an alarm system.
I asked BC about this a few days ago and they said the pain and hassle is generally not worth it and they recommended just installing the new next to the old one and leave it in there.
87 oct.
I have found that I need to have the nozzle pushed as far in the hole as I can get it, and as staight up and down as it will go then i can fill at normal speed, if it is not in all the way or is at an angle then it will splash back and turn the pump off, took awhile to figure out exactly where the nozzle needed to be, and it is differnt for all three of my tanks.
06′ P4 200 Opti
Jay Law
I hate to ask, but why, why, why in the world would someone swerve from hitting a deer in a rig that size? I would have plowed it over and kept on truckin, unless i clipped it then backstraps may have been salvageable. In all serious though that sucks them rigs aint cheap.
I can verify the voltage a little later today, I am just trying to figure out though if it is a voltage issue why would tapping/knocking on the gauge when running cause the rpm to fall back into the normal range? I would tend to believe if it was a voltage issue the gauge would be more erratic, not maintain a constant even though the wrong rpm is indicated, until the unit is tapped on? And i am assuminmg you want a direct DC reading off the back of the gauge and not what the voltmeter is showing correct?Last edited by JSLAW on May 29th, 2008, 5:22 pm, edited 1 time in total.
I talked with scott today and after telling him the story he tended to belive it was a guage issue. I will get ahold of my local dealer and try to arrange for a new gauge this week. Scott was saying this is a mercury gauge and will be covered under a warranty claim.
Judd I have read the post, but cannot find anywhere where it explains what you need to do in order to make the conversion, it may be a simple process that i am pverlooking but want to know how to do it before i go out and buy one. Thanks in advance. Jason
© 2024 Bass Cat Boats
